DESULFURIZATION PLANT
DESULFURIZATION PLANT MANUFACTURER
PPGT-HCDP Desulfuring Plant is a brand new alternative desulfuring process to HDS Process since its exclusive design of reactor which is able to accelarate the reaction between the desulfuring reagent and the sulfur containing compounds With PurePath sepcial design, it could increase the desulfurization reaction rate largely to get ultra-low sulfur and good performace commerical fuel oil same as from HDS process. Sulfides such as thiophenes, substituted benzo- and dibenzothiophenes are oxidized under low temperature and pressure conditions. Therefore, expensive hydrogen or high temeprature reaction condition is no need during desulfurization reaction to make the the PPGT process more suitable for medium and small refinery.
DESULFURIZATION PLANT
Hydro-Cavitation Desulfurization Plant
APPLICATIONS
As an alterantive solution of traditional HDS process, PPGT-UODS Plant can be used to remove the sulfur content from the feed such as Gas Oil, Diesel, Naphtha, Kerosene, Tyre Oil, Plastic Oil etc. to reduce the sulfur content to related international standards(i.e. 10ppm for Diesel, Naphtha & Kerosene;).
To further enhance your refinery capabilities and embrace sustainable practices, we recommend exploring our Waste Oil Recycling Plant and Lube Oil Refining Plant. These state-of-the-art systems are adept at transforming waste oil into valuable products while adhering to the highest industry standards. By incorporating these solutions into your operational framework, you can not only optimize sulfur reduction but also contribute to environmental conservation through responsible waste management and resource recovery.
PROJECTS
INFORMATION REQUEST
Please fill in the following form, we will respond your request in 24 hours.
Please specify your requirements by providing the following information:
- Feedstock: Name or type of feedstock to be processed
- Capacity: Planned daily processing capacity
- Product: Intended end product(s)
- Quality: Required specifications or standards for the final product
- Budget: Estimated project budget
- Additional Information: Any other relevant details or special considerations
INFORMATION REQUEST
Please fill in the following form, we will respond your request in 24 hours.
PROJECTS
INFORMATION REQUEST
Please fill in the following form, we will respond your request in 24 hours.
Please specify your requirements by providing the following information:
- Feedstock: Name or type of feedstock to be processed
- Capacity: Planned daily processing capacity
- Product: Intended end product(s)
- Quality: Required specifications or standards for the final product
- Budget: Estimated project budget
- Additional Information: Any other relevant details or special considerations
INFORMATION REQUEST
Please fill in the following form, we will respond your request in 24 hours.
