Industrial studies for waste oil re-refining, distillation, extraction & desulfurization process.

Gasoline and Diesel Synthesis from Waste Lubricating Oil: A Kinetic Approach An Investigation To The Recycling Of Spent Engine Oil Recycling of Used Motor Oil

Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges

AbstractAssessment of contaminant releases during utilization of used oils is essential for the determination of environmental acceptability. These paper reports the results of the study examining a toxic metal leachability from used engine oil and sludge samples employing leaching test (TCLP). The leaching test indicated that lead in oil samples exceeded 5-ppm concentration level what qua...

Learn More386

Gasoline and Diesel Synthesis from Waste Lubricating Oil: A Kinetic Approach

ABSTRACT: Waste lubricating oil arises wherever work is carried out with lubricating oil and where it is put to use for a particular purpose. Waste lubricating oil should be collected and reused in order to decrease detrimental effects on environment, and underground and surface waters, since it pollutes the atmospheric air as a result of burning and has adverse effects on living organis...

Learn More450

An Investigation To The Recycling Of Spent Engine Oil

AbstractThis paper describes an investigation carried out to study the recycling of spent engine oil as a result of indiscriminate dis-posal of the spent engine oil into the surrounding which has contributed immensely to the level of environmental pollution in our society and nation at large. This paper identify a unique method by which the spent oil is adequately recycled for re-use, the cost ...

Learn More349

Recycling of Used Motor Oil

The EPA estimates that there are 1 billion gal/y of used lubricants generated in the United States. Of this, 200 million gal/y are disposed of improperly. Additionally, it is believed that 40% of this material is poured directly into the ground [1]. These disposal methods not only pose a significant threat to local environments, but they also represent the waste of a valuable resource. I...

Learn More326

Development and current status of waste mineral oil regeneration process

Ⅰ. Classification of waste mineral oil technology1.Repurification process Settling, centrifugation, filtration, flocculation, one or several combined.This process is roughly equivalent to the simple regeneration in the past, and the main purpose is to remove the water in the waste oil, the mechanical impurities that are generally suspended, and the mechanical impurities that are stably disper...

Learn More387

What is the Difference between Flash Point and Ignition Temperature?

Flash PointThe flash point is the lowest temperature at which a substance vaporises into a gas, which can be ignited with the introduction of an external source of fire. There are two main methods of measuring a flash point – namely, open cup and closed up.Open cup flash point testing occurs when the substance is placed into a vessel which is open to the outside atmosphere. Its temperature ...

Learn More303


PILOT STUDY OF USED OILS IN NIGERIAByProf. O. A. Bamiro (National Expert) and Prof. O. Osibanjo (Project Coordinator)Study sponsored by the Secretariat of the Basel Convention, GenevaNovember, 2004TABLE OF CONTENTSLIST OF TABLES IVLIST OF FIGURES VPREFACE ...

Learn More381
Whatsapp Message